Dynamic Test
6. Dynamic Test
The main function of this window is to test the dynamic loading as need. First the software
will prompt the Output Name to indicate the Channel for action. It is necessary to refer to
this column when setting Mode and Loading. When the total Channel number is larger than
3, the scroll bar will be active. Users are able to scroll it for page change and the maximum
channel number of each page is 3. The functions of this window are explained below.
Figure 6-1 Dynamic Test Window
6.1 Selecting Mode
There are CCDL and CCDH loading modes in Dynamic Test. Each channel has these two
options. When different mode is selected, the loading range to be set changes too. Click
the mode of each channel will prompt a menu for selection or use the up and down arrow to
select it.
Figure 6-2 Dynamic Test- Mode Select
6-1
To Next Page
Loading...
