Digital Power Meter 66203/66204 User’s Manual
D-2
current is in normal state.
Long hour or frequent use of over current
could result the fuse on the internal current
circuit to blow out and cause the current
unable to be measured.
-RCE-
Range Change Error When the power measurement is set to run in
integration time mode, switch the voltage or
current range within the integration time may
cause the power integration measurement
error.
-Fan-
Fan Error The fan is having error during operation.
When the indicator of Channel 1 is on, it
means the error is occurred on the front fan;
while the indicator of Channel 2 is on, it
means the error is occurred on the rear fan.
The power meter won’t be ready for
measurement until the error is resolved.
Please contact Chroma or its distributor for
repair and services.
To Next Page
Loading...
