General Information
WARNING
No objects should be placed within the moving area of the driver’s
seat to prevent injury.
WARNING
Settings must be checked to ensure they are correctly engaged
before the motor coach is driven. Adjustments must not be made
while driving.
A correctly functioning and individually adjusted driver’s seat is
essential to good health. Seat is maintenance free. Take adequate
care of your seat to ensure that it functions properly.
CAUTION
Dirt can impair the function of the seat. Keep the seat clean.
Upholstery does not need to be removed from the seat frame for
cleaning.
NOTE: Do not soak through upholstery during cleaning. Do not use
pressure washer to clean seat.
CAUTION
Use standard commercially available upholstery or plastics
cleaning agent. Test for compatibility on a small, concealed area.
Check seat frequently to ensure proper function. Regularly check that
seat is tight. If seat wobbles, check for loose bolts or other faults. To
ensure proper function of the driver’s seat and to prevent damage of
pneumatic spring, adjust the loaded driver’s seat to the highest height
position.
Seat Operation
Height Adjustment
The seat height can be adjusted continuously within a range of 3.9 in.
(99 mm). Pull or press the handle for height adjustment to move the
seat upwards or downwards.
NOTE: Always release the handle after reaching the upper or lower
stop.
Lumbar Support
With front and back switch, the curvature in the upper and lower area of
the backseat upholstery can be adjusted individually.
The air compartments will be filled by setting the respective switch to “+”
and emptied by setting it to “-”.
Lateral Support Adjustment
By actuating the switch, the curvature of the lateral guide right and left
of the backrest can be adjusted individually by means of compressed
air.
By setting the switch to “+”, the air compartments will be filled. By setting
it to “-”, they will be emptied.
To Next Page
Loading...