CipherLab 8 Series

89
Chapter 4 BASIC Commands
4.8 RFID READER COMMANDS
For 8300/8500/8700 Series, it allows an optional RFID reader that can coexist with the
barcode reader, if there is any. The RFID reader supports read/write operations, which
depend on the tags you are using. The supported labels include ISO 15693, Icode®, ISO
14443A, and ISO 14443B.
Warning: Before programming, you should study the specifications of RFID tags.
Currently, the performance of many tags has been confirmed, and the results are listed
below.
Tag Type
UID only
Read Page
Write Page
TAG_MifareISO14443A
Mifare Standard 1K
  
Mifare Standard 4K
  
Mifare Ultralight
  
Mifare DESFire

--- ---
Mifare S50
  
SLE44R35

--- ---
SLE66R35
  
TAG_SR176
SRIX 4K
  
SR176
  
TAG_ISO15693
ICODE SLI
  
SRF55V02P

--- ---
SRF55V02S

--- ---
SRF55V10P

--- ---
TI Tag-it HF-I
  
TAG_Icode
ICODE
  
Note: These are the results found with RFID module version 1.0 ( for features
supported), and you may use SYSTEM_INFORMATION$(9) to find out version
information.