CipherLab 8 Series User Manual

225
Appendix III Scanner Parameters
USER PREFERENCES
No. (N1%)
Values (N2%) & Description
Default
Scan Engine
153 Focus Mode
2: Smart Focus
1: Near Focus
0: Far Focus
0 8500-2D
154 1: Enable Decode Aiming Pattern
0: Disable Decode Aiming Pattern
1 2D
155 1: Enable Decode Illumination
0: Disable Decode Illumination
1 2D
156 1: Enable Picklist Mode
0: Disable Picklist Mode
0
8200, 8400,
8700 -2D
Note: Picklist mode enables the decoder to decode only barcodes aligned under the
center of the laser aiming pattern.
158 1: Reader sleeps during system suspend
0: Reader is powered off during system suspend
0
8200, 8400,
8700 -2D
181 1: Enable Mobile Display
0: Disable Mobile Display
0 2D
Note: If the reader is powered off during system suspend, it will save battery power.
However, it takes about 3 seconds to restart the power after system resumes.

CipherLab 8 Series Specifications

General

Brand	CipherLab
Model	8 Series
Category	PDA
Language	English