CipherLab 8 Series User Manual

202
CipherLab BASIC Programming Part I
148 1: Enable UPC-E Triple Check
0: Disable UPC-E Triple Check
0 CCD, Laser
,
8700 –
Long
Range
Convert UPC-E to UPC-A
Decide whether or not to expand the read UPC-E barcode into UPC-
A. If true, the next processing
will follow the parameters configured for UPC-A.
Transmit Check Digit
Decide whether or not to include the check digit in the data being transmitted.
Transmit System Number
Decide whether or not to include the system number in the data being transmitted.
UPC-E Triple Check
Decide whether to apply a triple check to the UPC-E barcode. If enabled
, the correct rate will be
improved; however, enabling it may cause difficulties in reading some non-standard barcodes.
 This is helpful when the barcode is defaced and requires more attempts to check it.
ADDON SECURITY FOR UPC/EAN
No. (N1%)
Values (N2%) & Description
Default
Scan Engine
308 Addon security for UPC/EAN barcodes
Level: 0 ~ 30
0 8200/8400
CCD, Laser
Addon Security for UPC/EAN
The scanner is capable of decoding a mix of UPC/EAN barcodes with and without addons.
The read
redun
dancy (level) ranging from 0 to 30 allows changing the number of times to decode a
UPC/EAN barcode before transmission.
SCAN ENGINE, 2D OR (EXTRA) LONG RANGE LASER
CODABAR
No. (N1%)
Values (N2%) & Description
Default
Scan Engine
7 1: Enable Codabar (NW7)
0: Disable Codabar (NW7)
1
2D, (Extra)
Long Range
38 1: Transmit Codabar Start/Stop Character
0: DO NOT transmit Codabar Start/Stop Character
0
2D, (Extra)
Long Range
122 1: Codabar Length Limitation in Max/Min Length Format
0: Codabar Length Limitation in Fixed Length Format
0
2D, (Extra)
Long Range
123 Codabar Max Code Length / Fixed Length1 0
2D, (Extra)
Long Range

CipherLab 8 Series Specifications

General

Brand	CipherLab
Model	8 Series
Category	PDA
Language	English