CipherLab 8 Series User Manual

182
CipherLab BASIC Programming Part I
90 Code 39 Min Code Length / Fixed Length2
Note
Length1 must be greater than Length2.
0
2D, (Extra)
Long Range
91 1: Transmit UPC-E1 System Number
0: DO NOT transmit UPC-E1 System Number
0
2D, (Extra)
Long Range
92 1: Transmit UPC-E1 Check Digit
0: DO NOT transmit UPC-E1 Check Digit
0
2D, (Extra)
Long Range
93 1 : Enable GS1-128 Emulation Mode for UCC/EAN Composite
Codes
0 : Disable GS1-128 Emulation Mode for UCC/EAN Comp
osite
Codes
0 2D
94 1: Enable TCIF Linked Code 39
0: Disable TCIF Linked Code 39
0 2D
95 1: Convert UPC-E1 to UPC-A
0: No conversion
0
2D, (Extra)
Long Range
96 1: Enable Code 11
0: Disable Code 11
1 2D,
8300 –
LR
only
Note: By default, Code 11 is disabled on 8200/8400/8700.
97 1: Enable Bookland EAN
(#16 for EAN-13 is required to be 1.)
0: Disable Bookland EAN
0
2D, (Extra)
Long Range
98 1: Enable Industrial 25 (Discrete 25)
0: Disable Industrial 25 (Discrete 25)
1
2D, (Extra)
Long Range
99 1: Enable ISBT 128
0: Disable ISBT 128
1
2D, (Extra)
Long Range
100 1: Enable Trioptic Code 39
0: Disable Trioptic Code 39
0
2D, (Extra)
Long Range
101 1: Enable UCC/EAN-128
0: Disable UCC/EAN-128
1
2D, (Extra)
Long Range
102 1: Convert GS1 DataBar to UPC/EAN
0: No conversion
0
2D, (Extra)
Long Range
103 1: Enable GS1 DataBar Expanded
0: Disable GS1 DataBar Expanded
1
2D, (Extra)
Long Range
104 1: Enable GS1 DataBar Limited
0: Disable GS1 DataBar Limited
1
2D, (Extra)
Long Range
105 1: Enable GS1 DataBar Omnidirectional
0: Disable GS1 DataBar Omnidirectional
1
2D, (Extra)
Long Range

CipherLab 8 Series Specifications

General

Brand	CipherLab
Model	8 Series
Category	PDA
Language	English