CipherLab 8 Series User Manual

4.23 July. 02, 2012 Part I
 New: Add 8700-Long Range followed to CCD, Laser
Part II
 New: Appendix II add Wi-Fi Profile index
 New: Appendix IV add PCAT — Swiss(German) and Hungarian for
8400/8700.
 New: 4.2 Wi-Fi Profile
4.21 Mar. 14, 2012 Part I
 Modified: Appendix I ScannerDesTbl Array |
Symbology Table
II - Note: MSI and Code 11 are disabled for 8400 2D scan engine
by
default.
 Modified: Appendix II Symbology Parameters |
Scan Engine,
2D or (Extra) Long Range Laser – Note:
MSI and Code 11 are
disabled for 8400 2D scan engine by default.
Part II
 New: 10.3.1 “Command: FTP_ROUTINE$”
| Remarks | FTP Task
Variable Table - Note (4)
4.20 Dec. 12, 2011 Part I
 None
Part II
 Modified: 8780 removed from the manual.
 Modified: 10.3
.1: Parameters to rename / delete FTP files added to
command FTP_ROUTINE$ for 8200 & 8400.

Modified: Appendix V: FTP messages for renaming / deleting FTP
files added.
4.10 Jul. 07, 2011 Part I
 Modified: 4.19 Memory Commands — 8700’s updated
Part II
 Modified: 5.1 Bluetooth Profiles Supported —
Bluetooth HSP for 8200
removed
 Modified: Appendix IV Examples —
Bluetooth HSP (8200 Only)
removed
4.00 Mar. 21, 2011
BASIC Programming Guide split into Part I: Basics and Hardware
Control, and Part II: Data Communications
 Modified: add 8200 support
 Modified: add 8700 support
 Modified: remove 8580/8590

CipherLab 8 Series Specifications

General

Brand	CipherLab
Model	8 Series
Category	PDA
Language	English