CipherLab 8000 Series User Manual

95
The STREAM Wireless Studio allows configuring the following reader types, depending
on the module equipped on your mobile computer:
8000 8300 8400 8500 9400 9500CE
Barcode Reader
CCD Scan Engine
9 9 9 9 9 9
Laser Scan Engine
9 9 9 9 9 9
Long Range Laser Scan Engine (LR)
8
9
8
9
8
9
Extra Long Range Laser Scan Engine
(ELR)
8 8 8
9
8
9
2D Scan Engine
8 8 8
9 9 9
RFID Reader
ACG_RFID Module v0.9
8
8
8
9
8
8
ACG_RFID Module v1.0
8
9
8
9
8
9
TI_RFID Module v1.0.A
8
8
8
8 9 8
Options of different reader combination are allowed, such as 1D+RFID and 2D+RFID. For
each combination, both readers can be initialized and ready for scanning at the same
time (dual mode operation). For example, if you press the [Scan] button while running
the STREAM Wireless Studio run-time or client application on the mobile computer, it
will read a barcode in position or an RFID tag in proximity depending on which one
comes first.
Note: You cannot have 1D+2D scan engines installed on the mobile computer because
they are both barcode readers!
SYMBOLOGIES SUPPORTED
Varying by the scan engine installed, the supported symbologies or tag types are listed
below. For details on configuring associated settings, please refer to each Appendix
separately.
CCD, Laser LR, ELR 2D
Codabar
9 9 9
Code 11
8 8 9
Code 93
9 9 9
Composite Code
8 8 9
Appendix I
SCAN ENGINE SETTINGS

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)