CipherLab 8000 Series User Manual

30
STREAM Wireless Studio User Guide
1.3 EMULATION APPLICATION
The Terminal Emulation Application service allows you to reformat screens from a remote
host or server that runs VT100/220 or 5250 terminal emulation and process the collected
data back to it. Based on your mobile computer type, create an application template so
that you can access a specific host or server via the STREAM Server.
1.3.1 HOST/SERVER SOURCE
1) Go to File Menu > New > Emulation Application > Host/Server Source and
create your own host/server source.
2) Specify the emulation type, e.g. ANSI/VT, and how to access and reformat the host
screens as follows.
Host Link
Change IP
Click
to change the IP address of your host. After changing the
IP, click
again to apply the new IP.
Cancel Undo the action of changing host IP.
Telnet Port Specify the telnet port number. Port 23 is assigned by default.
Emulation Type Select the emulation type, ANSI/VT or 5250.
Keep Alive 0 ~ 65535, in units of second
Capture Screen
Connect Click the [Connect] button to establish a connection with the host.
Capture During the telnet session, click the [Capture] button to capture host screens
that needs editing.

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)