CipherLab 8000 Series User Manual

86
STREAM Wireless Studio User Guide
5.6 OPERATION ON THE MOBILE COMPUTER
When all is done with the STREAM Designer, launch the STREAM Server, and then, the
corresponding Simulator to debug program sequences step by step - powering ON,
starting a Telnet session, logging in, and running the program sequences designed in
your template.
If the simulation is found satisfactory, proceed to download the run-time program and
device settings to the mobile computer. Go on to start a Telnet session by logging in on
the real mobile computer.
Here we give a demonstration of the 9500CE mobile computer to show how it works.
5.6.1 LOAD PROGRAM & SETTINGS
Before we start with data collection application, you have created a database, an
application template, a user account for login, and configure necessary device settings in
the STREAM Designer.
1) First, make sure the client application has been installed to the mobile computer via
ActiveSync.
If so, double-tap the application program (.exe). Otherwise, go to Tools Menu >
Install STREAM CE Client to install it.
To restore the minimized window of the application, tap
on the taskbar (left
below). Select [STREAM 9500CE] from the pop-up menu.
To exit the application, tap Options > Exit or tap
from the toolbar (right below).

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)