CipherLab 8000 Series User Manual

34
STREAM Wireless Studio User Guide
1.3.2 EMULATION APPLICATION TEMPLATE
EMULATION TEMPLATE SETTINGS
Source
Terminal Type Select your terminal type.
Host Source Select a host source associated with the above terminal type.
 If your source supports ANSI/VT, proceed to configure VT
Emulation Settings.
 If your source supports 5250, proceed to configure TN
Emulation Settings.
Enable runtime barcode
setting / Set RFID Reader
 Select whether to enable runtime barcode setting as well as
RFID setting.
Font Size & Case
Small / Large
OR
Local Setting /
Fixed Size
The mobile computer screen size varies. Display capability, as shown in the table
below, depends on the screen size as well as the font you use. The font size
setting affects the default horizontal/vertical steps the cursor move at one time
on the host screen.
 By default, small font (6x8) is applied. Data coming in from the host will be
displayed accordingly. You may select to use large font (8x16).
 For 9400/9500 Series, select “Fixed Size” or leave it to “Local Setting” to

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)