CipherLab 8000 Series User Manual

100
STREAM Wireless Studio User Guide
Auto Power Off Mode Press the scan trigger to start with scanning.
 The scanning won't stop until the preset timeout expires, and, the
preset timeout period re-counts after each successful decoding.
Read Redundancy None
None No redundancy means one successful decoding will make the reading valid
and induce the "READER Event".
One time, Two times,
or Three times
The higher the reading security is (that is, the more redundancy the user
selects), the slower the reading speed gets.
 If "Three Times" is selected, it will take a total of four consecutive
successful decodings of the same barcode to make the reading valid.

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)