CipherLab 8000 Series User Manual

108
STREAM Wireless Studio User Guide
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
4~55
Code 39 Enable
Convert to Code 32 Convert to Italian Pharmacode. No
Code 32 Prefix Prefix character "A" to Code 32 barcodes. No
Verify Checksum Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
No
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
 "Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
No
Code 39 Full ASCII Code 39 Full ASCII includes all the alphanumeric and
special characters.
Disable
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
4~55
Trioptic Code 39 Disable
Code 93 Enable
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
4~55
MSI Enable
Verify Checksum If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of
the algorithms below. If the checksum is incorrect, the
barcode will not be accepted.
Check Digit Algorithm
One Check Digit Single Modulo 10
Two Check Digits
 Mod 10/Mod 11
 Mod 10/Mod 10
Single Modulo
10
Transmit Checksum Decide whether to include the checksum in the data being
transmitted.
No
Select Length
 Any Length
 One or two fixed lengths
 Range (1~55)
4~55
GS1 Databar ---
GS1 Databar -14 See below.
GS1 Databar Limited
"Convert to UPC/EAN" only applies to GS1 Databar -14 and
GS1 Databar Limited barcodes not decoded as part of a
See below.

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)