CipherLab 8000 Series User Manual

110
STREAM Wireless Studio User Guide
Transmit Checksum Decide whether to include the UPC-E1 checksum in the
data being transmitted.
Yes
Transmit Preamble Decide whether to include the UPC-E1 preamble System
Number (and Country Code) in the data being transmitted.
System
Number
Addon 2 / Addon 5 Refer to UPC/EAN Addon setting.
Convert to UPC-A The UPC-E1 barcode will be expanded into UPC-A, and the
next processing will follow the settings configured for
UPC-A.
No
UCC Coupon Extended Code Disable
Read UPC-A barcodes starting with digit "5", EAN-13 barcodes starting with digits "99", and
UPC-A/GS1-128 Coupon Codes.
 UPC-A, EAN-13, and GS1-128 must be enabled first!
UPC/EAN Addon ---
Addon 2 / Addon 5 Decide whether to decode EAN-8, EAN-13, UPC-E0,
UPC-E1, UPC-A with supplementals.
 Ignore Supplementals
 Decode Only With Supplementals
 Decode With Supplementals (= Auto-discriminate)
Ignore...
Addon Redundancy When "Decode with Supplementals" is applied, decide the
number of times of supplementary decoding the same
barcode that makes a valid reading.
10 times
Note: (1) Addon Redundancy is set to 14 times for LR/ELR Laser scan engine.
(2) Addon Redundancy is set to 10 times for 2D scan engine.

CipherLab 8000 Series Specifications

General

Humidity	5% to 95% non-condensing
Communication	Infrared
Barcode Scanner	Laser
Connectivity	Infrared
Storage Temperature	-20°C to 60°C
Keypad	21 keys (numeric / functional)