CipherLab 8300 User Manual

163
Appendix V Command Line Syntax
PROGLOAD
Command Line Syntax
You can use the command line to download a program file as well. At the command line prompt,
use the following command line arguments:
ProgLoad <File name>,<Download via>,<COM port>,<Baud rate>,<File type>,
<Operation mode>
Argument
Each argument is explained in the table below. If command line arguments are not given, you may
select the appropriate parameters from the dialog box that pops up.
Argument Description
File name Max length: 256 bytes
Full-path file name is required when file is not in the current working
directory.
Range: 1~3
It is set to 1 by default in the utility program.
Download via
 1:
RS-232 or IrDA
 2:
Cradle-IR
 3:
TCP/IP
COM port COM port: 1~255
It is set to 1 by default in the utility program.
TCP port: 1~65535
It is set to 3000 by default in the utility program.
Range: 1~5
It is set to 1 by default in the utility program.
Baud rate
 1:
115200 bps
 2:
57600 bps
 3:
38400 bps
 4:
19200 bps
 5:
9600 bps
Range: 0~2
It is set to 0 by default in the utility program.
File type
 0:
.SHX file
 1:
.SYN file
 2:
.BIN file

CipherLab 8300 Specifications

General

Brand	CipherLab
Model	8300
Category	PDA
Language	English