94
FORGE Batch Application Generator User Guide
5.1.7 BAUD RATE & MODEM SPEED
The [Baud Rate & Modem Speed] group box features speed options of the mobile
computer’s data transmission.
Baud Rate
By default, the baud rate is set to 115200 bps for communications via any interface other than
Modem.
Modem Speed
Only when the modem is selected for upload or download interface, this option will become
available.
For 8000/8300/8500, the data transmission speed depends on the IR control board of the
modem cradle which is set to 57600 bps by default. If you select any value other than 57600
bps, you need to adjust the DIP switch of the control board accordingly.
For 8200/8400, the modem cradle is capable of detecting baud rate.
Note: For the 8000/8300 Series, the version of IR control board on the modem cradle
must be greater than SV3.01.
5.1.8 RESET SETTINGS
Click this button to load the default settings. This button applies to all the three tabbed
pages of the Settings property:
The Initial property page. (See 5.1 Initial Setting)
The Function Key property page. (See 5.2 Function Key Setting)
The Security property page. (See 5.3 Security Setting)
Note: The current settings will be cleared.
To Next Page
Loading...
Need help?
General
