5
Introduction
Note: If you have installed the Batch AG to the default directory prompted by the
installation wizard, the AG runtime programs for 8 series models can be accessed
in the “C:\CipherLab\Forge\Batch\8 Series\RunTime\” directory. If not, browse to
where you have installed the Batch AG.
4) Click the OK button and then your PC starts sending the selected U8*.SHX file.
Note: To send a font file to the mobile computer, see
Localization.
DOWNLOAD APPLICATION TEMPLATES
After the downloaded runtime (U8*.SHX) is set up in the mobile computer, a user’s
application template (*.AGX) is further needed to enable the mobile computer to collect
data. Such template carrying application menus and data collecting forms makes it
possible for users to collect data and edit/manage data.
In order to have an “application template” for the mobile computer, you need to
customize/design one by the Batch AG on your PC.
DESIGN APPLICATION TEMPLATES
5) From the menu bar of the Batch AG, click File | New or File | Open to open a new
or an existing application template. An application template is composed of six groups
of properties.
6) In the left pane of the Batch AG, click on the plus sign of the “Application
Template” to see the drop-downs. From the drop-downs, click
to start
your customization of a new or a lately edited application template.
Warning: The reader type information is essential for sending the template file to the
mobile computer. Select Settings -> Initial -> Reader Option, and then click the
Reader Type drop-down menu to specify the barcode reader type that is consistent with
the reader actually integrated with the mobile computer; otherwise you will be alerted
with the "wrong reader type" message.
To Next Page
Loading...
Need help?
General
