176
FORGE Batch Application Generator User Guide
UPDATE SCRIPT FILE
“UpdateScript,(1/0)” is required for checking any update to the script file. This line
must be run before transmitting or receiving files.
Format
The line must be “UpdateScript,(1/0),<Mandatory>”.
When new script file is available, it will first update the script file, and then run the lines
in the new script file to transmit or receive files, as shown below.
Note: If a different server is specified in the new script, it will connect to the new server
in the next connection. If you need to switch to a different server immediately, use
the SWITCH command.
To Next Page
Loading...
Need help?
General
