CipherLab Cipher Lab 1560 User Manual

156
Enter Setup
1560 Series Barcode Scanner User Guide
5.2 CHARACTER SUBSTITUTION
Character substitution is performed on every occurrence of the first character specified. If
only one character is specified, every occurrence of that character in the barcode will be
taken away.
 The first character will be replaced by the second character(s).
 Up to three sets of character substitution can be configured.
 If “BT HID”, “USB HID” or “Keyboard Wedge” is configured for interface, Key Type
and
Key Status will then become applicable. You may decide whether or not to apply
Key Status when “Normal Key” is selected for Key Type.
Key Type Key Status
Scan Code Only 1 scan code value is allowed.
Refer to 5.2.1 Select a Set for
Character Substitution
.
N/A
Normal Key Up to 3 character strings are
allowed.
 Add Shift
 Add Left Ctrl
 Add Left Alt
 Add Right Ctrl
 Add Right Alt
Refer to
Keyboard Wedge Table.
Note: The character substitution is performed only on the barcode itself and before the
processing of editing formats. It is not applicable to the Prefix/Suffix Code, Code
ID, Length Code, or any Additional Field.

CipherLab Cipher Lab 1560 Specifications

General

Brand	CipherLab
Model	Cipher Lab 1560
Category	Barcode Reader
Language	English