Version Date Notes
1.10 Aug 31, 2011
New: “Auto Power Off Ignoring Scan Mode” is added. Sections
involved are:
- Renamed section 1.1.1 “Turn on/off the Scanner”
- Modified section: 1.1.2 “Power Economy”.
- Adjusted new section: 1.1.3 “Power Economy vs. WPAN
Connection”
1.09 May 25, 2011
Modified: 3656+USB+Adaptor issue
Modified: 2.1 BT HID — add Inter-Character Delay
Modified: 2.6 USB HID via 3656 — add Inter-Character Delay
1.08 Mar. 11, 2011
New: Quick Start — Create One-Scan Setup Barcodes (e.g. ”109950”
”#@109950#”)
Modified: 1.11 Auto-Sense Mode (1560 Only) — add High Sensitivity
behavior
Modified: Specifications — Power Adaptor
1.07 Jan. 10, 2011
Modified: Introduction, Product Highlights — add CipherConnect
Modified: 4.10 GS1-128 (EAN-128) —
Cannot read when disabled
since firmware v1.01
Modified: 5.6.1 Edit a Concatenation of Barcodes — Code type for
ISBT 128
New: 6.4.5 Pause Field Setting
Modified: 6.5 Configuring Format — Define Transmission Sequence
(add Pause Field, Null Character Field )
1.06 Nov. 30, 2010
Modified: Introduction, Symbologies Supported — add support of
more RSS symbologies
New: Introduction — Charging the Battery via Charger
Modified: 1.1.2 Auto Power Off & Power-Saving
Modified: 1.4 Beeper — describe “Low Battery Alarm”
New: 2.1.6 Keypad Support for iPhone/iPad
Modified: 3.2.3 Connect to Dongle —
describe random PIN in Step
12
Modified: 4.16 GS1 DataBar (RSS Family)
Modified: 4.16.2 GS1 DataBar Omnidirectional (RSS-14)
Modified: 4.16.3 GS1 DataBar Expanded (RSS Expanded)
Modified: 5.2 Character Substitution —
add table for Scan
Code/Normal Key
RELEASE NOTES
To Next Page
Loading...
Need help?
General
