CipherLab Cipher Lab 1560 User Manual

41
Update
Chapter 1 Understanding the Barcode Scanner
1.6.3 LASER MODE
The scanner will start scanning once the trigger is held down.
 The scanning won’t stop until (1) a barcode is decoded, (2) the pre-set timeout
expires, or (3) you release the trigger.
Note: Refer to “Scanning Timeout”.
*Laser Mode
1.6.4 AUTO OFF MODE
The scanner will start scanning once the trigger is pressed.
 The scanning won’t stop until (1) a barcode is decoded, and (2) the pre-set timeout
expires.
Note: Refer to “Scanning Timeout”.
Auto Off Mode
1.6.5 AUTO POWER OFF MODE
The scanner will start scanning once the trigger is pressed.
 The scanning won’t stop until the pre-set timeout expires, and, the pre-set timeout
period re-counts after each successful decoding.
Note: Refer to “Delay between Re-read” and “Scanning Timeout”.
Auto Power Off Mode

CipherLab Cipher Lab 1560 Specifications

General

Brand	CipherLab
Model	Cipher Lab 1560
Category	Barcode Reader
Language	English