CipherLab Cipher Lab 1560 User Manual

230
Enter Setup
1560 Series Barcode Scanner User Guide
ENTERING PIN CODE FOR AUTHENTICATION
USE PRESET PIN
1) In the configuration mode, read the barcode below to use a preset PIN for
authentication.
Use Preset PIN
2) Read one of the barcodes to specify the PIN code, in decimal or hexadecimal.
By default, the PIN code is set to “0000”. Maximum 16 characters are allowed.
Enter PIN in
Hexadecimal…
E
nter PIN in
Decimal…
3) Read the “
Decimal Value” barcode on page 227 or the “Hexadecimal Value” barcode
on page
228 for the desired digits or character string.
Read the “Clear PIN Code” barcode first if you need to re-input the PIN code.
Clear PIN Code
4) Read the “Validate” barcode to complete this setting.

CipherLab Cipher Lab 1560 Specifications

General

Brand	CipherLab
Model	Cipher Lab 1560
Category	Barcode Reader
Language	English