CipherLab Cipher Lab 1560 User Manual

33
Update
Chapter 1 Understanding the Barcode Scanner
1.3.1 GOOD READ LED
*
Enable
Good Read LED
D
isable
Good Read LED
1.3.2 GOOD READ LED DURATION
By default, the Good Read LED stays on for 40 milliseconds. Specify a value, ranging
from 1 to 254 in units of 10 milliseconds.
Good Read LED
Time-out after
0
.01~2.54 sec.
(*40 ms)
1) Read the barcode above to specify the time interval before the Good Read LED goes
off.
2) Read the “
Decimal Value” barcode on page 227. For example, read “1” and “5” for the
Good Read LED to go off after 150 milliseconds.
3) Read the “Validate” barcode on the same page to complete this setting.

CipherLab Cipher Lab 1560 Specifications

General

Brand	CipherLab
Model	Cipher Lab 1560
Category	Barcode Reader
Language	English