CipherLab RK25WO

190
RK25WO Mobile Computer
The available commands are devided into 6 groups:
SEND BARCODE DATA
“Send Barcode Data” actions affect the output character field and the output length (count
of characters). All the other kinds of actions must collaborated with the “Send Barcode Data”
actions to reformat the barcode data to be sent out.
Command
Description
Send up to character
To set a specific character as a period, and only the part anterior to
this specific character will be output.
Example
The decoded data:
0001112223334
Actions:
Send data up to “3”.
The output data:
000111222
Send up to
To set how many characters to be output.
Example
The decoded data:
0001112223334
Actions:
Send up to “3” characters.
The output data:
000
Send up To specific string
To send the part up till the specific string (this specific string is
excluded).
Example
The decoded data:
0001112223334
Actions:
Send up to the string “333”.
The output data:
000111222
Send remaining
This command works with those commands of “Move Cursor” to send
the data posterior to the cursor.
Example
The decoded data:
0001112223334
Actions:
Move cursor to next 1.
Send all the data that remains.
The output data:
001112223334
Send remaining and skip
To send all the data (posterior to the cursor) aside from the last
character(s) you set.
Example
The decoded data:
0001112223334
Actions:
Send all the data that remains and skip the
last 1.
The output data:
000111222333