CipherLab RK25WO

191
Using Reader Configuration Utility
MOVE CURSOR
The actions of “Move Cursor” must work with those “Send Barcode Data” actions to define
the start position to output the decoded data.
Command
Description
Move to start
To move the cursor to the very beginning.
Example
The decoded data:
0001112223334
Actions:
Move cursor to the start.
Send all the data that remains.
The output data:
0001112223334
Move to end
To move the cursor to the end.
Example
The decoded data:
0001112223334
Actions:
Move cursor to the end.
Send all the data that remains.
The output data:
None.
Move to character
To move the cursor in front of the specific character you set.
Example
The decoded data:
0001112223334
Actions:
Move cursor to the character “2”.
Send all the data that remains.
The output data:
2223334
Move to next
To move the cursor to the specific position from the beginning.
Example
The decoded data:
0001112223334
Actions:
Move cursor to the next “5”.
Send all the data that remains.
The output data:
12223334
Move to specific string
To move the cursor in front of the specific string you set.
Example
The decoded data:
0001112223334
Actions:
Move cursor to the string “333”.
Send all the data that remains.
The output data:
3334