Circutor CVM-C5 Series - 4�4�- Tariffs; 4�5�- DIGITAL OUTPUT ( MODEL CVM-C5-XXX-RS485-C)

4�4�-TARIFFS
TheCVM-C5 hastwotari󰀨s,T1andT2,whichcanbeselectedthroughaModbus�See“4.7.2.1.
Selecting the active tari“.
InthemodelCVM-C5-xxx-485-I canalsobeselectedtari󰀨viathedigitalinput�Dependingon
thestateoftheinput,seeTable 9�
Table 9: Tari󰀨 selection.
Tari󰀨 Digital input
T1 0
T2 1
ThesymbolsT1andT2thatappearonthedisplayintheconsumptiondataareaindicatethe
selectedtari󰀨andthetari󰀨beingshownaccordingtoTable 10�
Table 10: Displaying tari󰀨s on the display.
Symbol Display Selected tari󰀨
T1ashing Tari󰀨1 Tari󰀨1
T1ashing
T2steady
Tari󰀨2 Tari󰀨1
T1ashing Tari󰀨2 Tari󰀨2
T2ashing
T1steady
Tari󰀨1 Tari󰀨2
4�5�-DIGITALOUTPUT(ModelCVM-C5-xxx-RS485-C)
ThemodelCVM-C5-xxx-RS485-ChasanoptoisolatedNPNtransistor(terminals3and4of
Figure 1)thatmaybeprogrammedas:
Apulse output by kWh or kvarh�
Analarmassociatedwithameasurementparameter�
27
Instruction Manual
CVM-C5-xxx-485