Cisco 12000 - Series Chassis Modular Expansion Base User Manual

1-4
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Chapter 1 Overview: Cisco 12000 Series Router SPA Interface Processors
Cisco 12000 SIP-400 Overview
The show version and show hardware commands display the current hardware configuration of the
router, including the system software version that is currently loaded and running. For complete
descriptions of show commands, refer to the Cisco IOS Configuration Fundamentals Configuration
Guide and the Cisco IOS Configuration Fundamentals Command Reference for the installed Cisco IOS
release.
Cisco 12000 SIP-400 Overview
The following sections describe the Cisco 12000 SIP-400:
• Cisco 12000 SIP-400 Board Components, page 1-4
• Cisco 12000 SIP-400 LEDs, page 1-5
• Cisco 12000 SIP-400 Physical Specifications, page 1-6
• SPA Slot Numbering on the Cisco 12000 SIP-400, page 1-6
• SPA Interface Addresses on the Cisco 12000 SIP-400, page 1-7
Cisco 12000 SIP-400 Board Components
The main Cisco 12000 SIP-400 board components are shown in Figure 1-1. Board reference designators
are indicated after the board component name.
Cisco 12000
SIP-401
12000-SIP-401 12.0(32)S 1.0
Cisco 12000
SIP-501
12000-SIP-501 12.0(32)S 1.0
Cisco 12000
SIP-601
12000-SIP-601 12.0(32)S 1.0
Table 1-3 SIP Hardware and Software Compatibility
SIP Part Number
Minimum Cisco IOS Software
Release
Minimum Hardware
Revision

Cisco 12000 - Series Chassis Modular Expansion Base Specifications

General

Brand	Cisco
Model	12000 - Series Chassis Modular Expansion Base
Category	Network Router
Language	English