Cisco 12000 - Series Chassis Modular Expansion Base User Manual

1-16
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
Chapter 1 Overview: Cisco 12000 Series Router SPA Interface Processors
Cisco 12000 SIP-501 Overview
The Cisco 12000 SIP-501 LEDs are described in Table 1-12.
Cisco 12000 SIP-501 Physical Specifications
The Cisco 12000 SIP-501 physical specifications are shown in the following table.
SPA Subslot Numbering on the Cisco 12000 SIP-501
The Cisco 12000 SIP-501 accepts up to 4 single-width SPAs or 1 dual-width SPA.
Figure 1-15 shows a Cisco 12000 SIP-501 with 2 SPAs installed. The left SPA slot is subslot 0 and the
right SPA slot is subslot 1. If one dual-width SPA is installed, it is recognized as being in subslot 0.
Figure 1-15 Subslot Locations for the 1-Port 10-Gigabit Ethernet SPA
2 SPA subslot 1 6 Status LED
3 SPA subslot 2 7 Rate LED
4 SPA subslot 3
Table 1-12 Cisco 12000 SIP-501 LEDs
LED Label Color State Meaning
Status Yellow On SIP is powered and IOS is loading.
Green On SIP is active.
Rate Off Off SIP is SIP-401 or SIP-501.
Green On SIP is SIP-601.
Table 1-13 Cisco 12000 SIP-501 Physical Specifications
Description Specifications
Physical dimensions Occupies one line card slot on a Cisco 12000 Series Router
Shipping weight 10kg
Operating temperature 32 to 104°F (0 to 40°C)
Relative humidity 10 to 90 percent, noncondensing
Storage temperature –4 to 149°F (–20 to 65°C)
12000-SIP-600
0
116872
STATU S
SPA-1XTENGE-XFP-A
ACTIVE/LINK
SPA10X1GE-A
STATUS
4
9
3
8
2
7
1
6
0
5
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
A/L
1
2

Cisco 12000 - Series Chassis Modular Expansion Base Specifications

General

Brand	Cisco
Model	12000 - Series Chassis Modular Expansion Base
Category	Network Router
Language	English