Contents
vi
Cisco 12000 Series Router SIP and SPA Hardware Installation Guide
Release 12.0(32)SY1, OL-8831-01, Rev. G6, July 19, 2007
1-Port OC-192c/STM-64 POS RPR XFP SPA Overview 2-37
1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs 2-38
1-Port OC-192c/STM-64 POS/RPR XFP SPA Interface Specifications 2-39
1-Port OC-192c/STM-64 POS/RPR XFP SPA Optical Transceiver Modules, Connectors, and
Cables
2-39
OC-192 Module Connections 2-40
Mate Interface Cables 2-41
2-Port OC-48 POS RPR SPA Overview 2-42
2-Port OC48-POS/RPR SPA LEDs 2-42
2-Port OC48-POS/RPR SPA Interface Specifications 2-43
2-Port OC48-POS/RPR SPA Cables, Optical Transceiver Modules, and Connectors 2-43
2-Port, 4-Port, and 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA, 4-Port OC-3c/STM-1 POS SPA, and
8-Port OC-3c/STM-1 POS SPA Overview
2-44
2-Port, 4-Port, and 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA and 4-Port and 8-Port
OC-3c/STM-1 POS SPA LEDs
2-44
2-Port, 4-Port, and 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA and 4-Port and 8-Port
OC-3c/STM-1 POS SPA Interface Specifications
2-45
2-Port, 4-Port, and 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS SPA and 4-Port and 8-Port
OC-3c/STM-1 POS SPA Optical Transceiver Modules and Cables
2-46
CHAPTER
3 Preparing to Install a SPA Interface Processor or a Shared Port Adapter 3-1
Required Tools and Equipment 3-1
Safety Guidelines 3-1
Safety Warnings 3-2
Warning Definition 3-2
Electrical Equipment Guidelines 3-6
Telephone Wiring Guidelines 3-7
Preventing Electrostatic Discharge Damage 3-7
Laser/LED Safety 3-8
CHAPTER
4 Installing and Removing a SPA Interface Processor 4-1
Handling SIPs 4-1
Removing and Installing a SIP 4-2
Guidelines for SIP Removal and Installation 4-2
Removing a SIP 4-3
Installing a SIP 4-5
CHAPTER
5 Installing and Removing a Shared Port Adapter 5-1
Handling SPAs 5-1
To Next Page
Loading...
Need help?
General
