EasyManuals Logo

Cisco 4431 ISR User Manual

Cisco 4431 ISR
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #166 background imageLoading...
Page #166 background image
6-14
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Chapter 6 Install and Upgrade Internal Modules and FRUs
Overview of the SSD Carrier Card NIM (NIM-SSD)
Figure 6-7 shows the top of the SSD carrier card NIM along with the serial number and the label
location.
Figure 6-7 Top View of the SSD Carrier Card NIM with Serial Number
Solid State Drives
The routers contain two solid state drives (SSD) that provide nonvolatile storage in the form of an
internal flash disk. On the front panel of the router, the SSD LED indicates activity on the hard drive.
The SSD carrier card NIM can support up to two SFF 2.5” SATA2 or SATA3 (7mm or less) SSDs.
Figure 6-8 shows a top view of the SSD drive that can be inserted into a NIM carrier card. Figure 6-9
shows two SSDs in a NIM carrier card.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 4431 ISR and is the answer not in the manual?

Cisco 4431 ISR Specifications

General IconGeneral
Total onboard WAN or LAN 10/100/1000 ports4
RJ-45-based ports4
SFP-based ports2
NIM slots2
Enhanced service-module slots1
Rack height1 RU
Redundant power supplyOptional
Memory4 GB
Flash Memory4 GB
USB Ports2
Console Port1 x RJ-45
Auxiliary Port1 x RJ-45
Power SupplyAC 100-240V
Operating Temperature0 to 40°C
Storage Temperature-20 to 65°C
Humidity5% to 85% noncondensing
Dimensions (H x W x D)44.5 x 438.15 x 438.15 mm
Weight7.5 kg (16.5 lb)

Related product manuals