EasyManua.ls Logo

Cisco 7010 - Firepower 8000 Series Physical and Environmental Parameters

Cisco 7010
204 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7-29
Firepower 7000 and 8000 Series Installation Guide
Chapter 7 Hardware Specifications
Firepower 8000 Series Devices
Firepower 8000 Series Physical and Environmental Parameters
The following table describes the physical attributes and environmental parameters for AMP8x50 and
81xx Family devices.
Table 7-42 AMP8x50 and 81xx Family Physical and Environmental Parameters
Parameter Description
Form factor 1U
Dimensions
(D x W x H)
28.7 in. x 17.2 in. x 1.73 in. (72.8 cm x 43.3 cm x 4.4 cm)
Weight
maximum installed
43.5 lbs (19.8 kg)
Copper 1000BASE-T
configurable bypass
NetMod
Quad-port Gigabit copper Ethernet configurable bypass interfaces in a paired configuration
Cable and distance: Cat5E at 50 m
Fiber 10GBASE
configurable bypass
MMSR or SMLR NetMod
Dual-port fiber configurable bypass interfaces with LC connectors
Cable and distance:
LR is single-mode at 5000 m (available)
SR is multimode fiber (850 nm) at 550 m (standard)
Fiber 1000BASE-SX
configurable bypass
NetMod
Quad-port fiber configurable bypass interfaces 1000BASE-SX with LC connectors
Cable and distance: SX is multimode fiber (850 nm) at 550 m (standard)
Copper 1000BASE-T
non-bypass NetMod
Quad-port Gigabit copper Ethernet non-bypass interfaces in a paired configuration
Cable and distance: Cat5E at 50 m
Fiber 10GBASE
non-bypass
MMSR or SMLR NetMod
Quad-port fiber non-bypass interfaces with LC connectors
Cable and distance:
LR is single-mode at 5000 m (available)
SR is multimode fiber (850 nm) at 550 m (standard)
Fiber 1000BASE-SX
non-bypass NetMod
Quad-port fiber non-bypass interfaces 1000BASE-SX with LC connectors
Cable and distance: SX is multimode fiber (850 nm) at 550 m (standard)
Power supply Dual 650 W redundant power supplies designed for AC or DC.
AC Voltage: 100 VAC to 240 VAC nominal (85 VAC to 264 VAC maximum)
AC Current: 5.2A maximum over the full range, per supply
2.6A maximum for 187 VAC to 264 VAC, per supply
AC Frequency range: 47 Hz to 63 Hz
DC Voltage: -48 VDC nominal referenced to RTN
-40 VDC to -72 VDC maximum
DC Current: 11A maximum, per supply
Operating temperature 50°F to 95°F (10°C to 35°C)
Non-operating temperature -29°F to 158°F (-20°C to 70°C)
Operating humidity 5% to 85% non-condensing
Non-operating humidity 5% to 90%, non-condensing with a maximum wet bulb of 82
o
F (28
o
C) at temperatures from
77°F to 95°F (25°C to 35°C)
Altitude 0ft (sea level) to 6000 ft (0 to 1800 m)

Table of Contents

Related product manuals