CHAPTER
7-1
Firepower 7000 and 8000 Series Installation Guide
7
Prepare to Installation
This chapter prepares you to install the Cisco Firepower 7000 and 8000 Series appliances and contains
the following sections:
Installation Guidelines, page 7-1
Safety Recommendations, page 7-2
Maintain Safety with Electricity, page 7-3
Prevent Electrostatic Discharge Damage, page 7-3
Site Environment, page 7-4
Power Supply Considerations, page 7-4
Equipment Rack Configuration Considerations, page 7-4
Installation Guidelines
When you are installing an appliance, use the following guidelines:
• Ensure that there is adequate space around the appliance to allow for servicing the appliance and for
adequate airflow. The airflow in the appliance is from front to back.
• Ensure that the air-conditioning can keep the security appliance at a temperature of 41 to 95°F (5 to
35°C).
• Ensure that the cabinet or rack meets the rack requirements.
• Ensure that the site power meets the power requirements listed in 770 W AC Power Supply. If
available, you can use an uninterruptible power supply (UPS) to protect against power failures.
To Next Page
Loading...
