1-8
Firepower 7000 and 8000 Series Installation Guide
Chapter 1 Introduction to the Firepower System
Firepower System Appliances
7000 and 8000 Series Device Chassis Designations
The following section lists the 7000 Series and 8000 Series devices and their respective chassis hardware
codes. The chassis code appears on the regulatory label on the outside of the chassis, and is the official
reference code for hardware certifications and safety.
7000 Series Chassis Designations
The following table lists the chassis designations for the 7000 Series models available world-wide.
8000 Series Chassis Designations
The following table lists the chassis designations for the 7000 and 8000 Series models available
world-wide.
traffic channels yes no no
multiple management interfaces yes no no
malware storage pack yes no no
restricted command line interface (CLI) yes yes yes
external authentication yes no no
connect to an eStreamer client yes yes no
Table 1-3 Supported Capabilities by Managed Device Model (continued)
Feature or Capability
7000 and 8000 Series
Device ASA FirePOWER
Virtual
Device
Table 1-4 7000 Series Chassis Models
Firepower and AMP Device
Model Hardware Chassis Code
7010, 7020, 7030 CHRY-1U-AC
7050 NEME-1U-AC
7110, 7120 (Copper) GERY-1U-8-C-AC
7110, 7120 (Fiber) GERY-1U-8-FM-AC
7115, 7125, AMP7150 GERY-1U-4C8S-AC
Table 1-5 8000 Series Chassis Models
Firepower and AMP Device Model Hardware Chassis Code
AMP8050 (AC or DC power) CHAS-1U-AC/DC
8120, 8130, 8140, AMP8150
(AC or DC power)
CHAS-1U-AC/DC
8250, 8260, 8270, 8290
(AC or DC power)
CHAS-2U-AC/DC
To Next Page
Loading...
