Contents
5
Firepower 7000 and 8000 Series Installation Guide
Using SFP Transceivers in 3D71x5
and AMP7150 Devices
B-1
3D71x5 and AMP7150 SFP Sockets and Transceivers B-1
Inserting an SFP Transceiver B-2
To insert an SFP transceiver: B-2
Removing an SFP Transceiver B-3
Inserting and Removing Firepower 8000 Series Modules C-1
Module Slots on the Firepower 8000 Series Devices C-1
Firepower 81xx Family C-1
Firepower 82xx Family and 83xx Family C-2
Included Items C-2
Identifying the Module Parts C-3
Before You Begin C-4
Removing a Module or Slot Cover C-5
Inserting a Module or Slot Cover C-6
Scrubbing the Hard Drive D-1
Scrubbing the Contents of the Hard Drive D-1
Preconfiguring Firepower Managed Devices E-1
Before You Begin E-1
Required Preconfiguration Information E-1
Optional Preconfiguration Information E-2
Preconfiguring Time Management E-2
Installing the System E-3
Registering a Device E-3
Preparing the Appliance for Shipment E-4
Deleting Devices from a Management Center E-4
Deleting a License from a Management Center E-5
Powering Down the Appliance E-5
Shipping Considerations E-5
Troubleshooting the Appliance Preconfiguration E-6
To Next Page
Loading...
