Cisco 7960 User Manual

Configuring Outlook to Use TAPI
158 Set Up Outlook for TAPI Cisco 7960/7940 Telephone User Guide
620-05600070B
16. Click OK to return to the Phone and Modem Options dialog box.
17. Click Close in the Phone and Modem Options dialog box.
Windows is now configured to allow users to make calls from their contacts, but the
TAPI-enabled program must be configured to use the line for dialing. For
information on configuring the program to use the telephone line for dialing, go to
“Configuring Outlook to Use TAPI”.
Configuring Outlook to Use TAPI
To configure Outlook or another TAPI-enabled program to dial using the system,
use the following steps:
1. If not already running, start Outlook (or the TAPI-enabled application).
2. Click the Contacts icon to switch to the Contacts listing.
3. Right click any contact to bring up the Actions shortcut menu.

Cisco 7960 Specifications

General

Codecs	G.711, G.729a
Protocol Support	SCCP, SIP
Ethernet Ports	2 x 10/100 Ethernet ports
Power Options	Power over Ethernet (PoE), AC adapter
Audio	Full-duplex speakerphone
Buttons	6 line buttons
Weight	3.5 pounds