Two-column mode
In two-column mode, each of the buttons on the left and right of the screen is assigned to different lines.
In this configuration, the Key Expansion Module displays 18 lines on page 1, and 18 lines on page 2.
The following graphic shows the two-column mode.
Place a Call on the Key Expansion Module
Procedure
Step 1
Press the line button on the Key Expansion Module.
Step 2
Dial a telephone number.
Configure KEM Buttons
Before you can set up KEM buttons, contact your system administrator for the following information to access
your Self Care Portal:
•
URL
•
username and password
After you have this information, you can configure your speed-dial numbers or program buttons to access
phone services. Phone services can include, for example, weather, stock quotes, or corporate calendars and
directories.
Cisco IP Phone 8811, 8841, 8845, 8851, 8851NR, 8861, and 8865 User Guide for Cisco Unified Communications
Manager 11.0
136
Accessories
Place a Call on the Key Expansion Module
REVIEW DRAFT - CISCO CONFIDENTIAL
To Next Page
Loading...
Need help?
General
