Table 70: Profile Parameters
DescriptionParameter
Allows you to select the authentication method that
is used to secure access to the Wi-Fi network.
Depending on the method you choose, a password,
passphrase, or key field appears so that you can
provide the credentials that are required to join this
Wi-Fi network. Options are:
• Auto
• EAP-FAST
• PEAP-GTC
• PEAP-MSCHAPV2
• PSK
• WEP
• None
Default: None
Security mode
Allows you to enter a name for the SSIDs. This name
displays on the phone. Multiple profiles can have the
same network name with different security mode.This
name displays on the phone.
Network name
Allows you to enter a user ID for the network profile.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC,
PEAP-MSCHAPV2. This is a mandatory field and it
allows maximum length of 32 alphanumeric
characters.
User ID
Allows you to enter password for the network profile
that you create.
This field is available when you set the security mode
to Auto, EAP-FAST, PEAP-GTC,
PEAP-MSCHAPV2. This is a mandatory field and it
allows maximum length of 64 alphanumeric
characters.
Password
Allows you to enter password for the network profile
that you create.
This field is available when you set the security mode
to WEP. This is a mandatory field and it allows
maximum length of 32 alphanumeric characters.
WEP key
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
338
Cisco IP Phone Installation
Scan and Save a Wi-Fi Network
To Next Page
Loading...
