Cisco 8861 Guide

DescriptionParameter
iSAC codec name used in SDP.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<iSAC_Codec_Name
ua="na">iSAC</iSAC_Codec_Name>
• In the phone web page, enter an appropriate
codec name.
Allowed values:
Default: iSAC
iSAC Codec Name
OPUS codec name used in SDP.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<OPUS_Codec_Name
ua="na">OPUS</OPUS_Codec_Name>
• In the phone web page, enter an appropriate
codec name.
Allowed values:
Default: OPUS
OPUS Codec Name
AVT codec name used in SDP.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<AVT_Codec_Name
ua="na">telephone-event</AVT_Codec_Name>
• In the phone web page, enter an appropriate
codec name.
Allowed values:
Default: telephone-event
AVT Codec Name
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
364
Cisco IP Phone Installation
SDP Payload Types

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)