Cisco 8861 - Page 388

DescriptionParameter
The external SIP port number.
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<EXT_SIP_Port_1_
ua="na">5060</EXT_SIP_Port_1_>
• In the phone web page, enter a port number.
Allowed values:
Default: 5060
EXT SIP Port
The Cisco IP Phone authenticates the sender when it
receives a NOTIFY message with the following
requests:
• resync
• reboot
• report
• restart
• XML-service
Perform one of the following:
• In the phone configuration file with
XML(cfg.xml), enter a string in this format:
<Auth_Resync-Reboot_1_
ua="na">No</Auth_Resync-Reboot_1_>
• In the phone web page, select Yes to enable the
feature.
Allowed values: Yes|No
Default: Yes
Auth Resync-Reboot
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
368
Cisco IP Phone Installation
Parameters for SIP Settings on Extensions