Cisco 8875 - Settings; Set time zone and time format

CHAPTER 5
Settings
• Settings, on page 33
• Set time zone and time format, on page 33
• Change language on your phone, on page 34
• Connect to a Wi-Fi network, on page 35
• Connect a Bluetooth headset to your phone, on page 35
• Unpair a Bluetooth headset, on page 36
• Set phone ringtone and volume, on page 36
• Restart your phone, on page 37
• Reset your phone to the factory settings, on page 37
Settings
Draft comment: The content in this section is subject to change as development proceeds.
Customize your phone settings to display your local time and language and have better audio and video
experience in calls and meeting.
Set time zone and time format
The default time zone on your phone is GMT-8:00. Set your time zone to display your local time on the phone.
Your phone displays time in 12-hour format by default. You can change it to 24-hour time format, if needed.
Procedure
Step 1 Press .
Step 2 Go to the Language and region section.
Step 3 Tap Time settings > Time zone and select your time zone.
Step 4 Tap Time format and select 24-hour or 12-hour time format as you need.
Cisco Video Phone 8875 Documentation
33