Cisco 8875 - Unpair a Bluetooth Headset; Set Phone Ringtone and Volume

Procedure
Step 1 Press .
Step 2 Scroll down to the Audio section and tap Bluetooth.
Step 3 Tap the Bluetooth switch to toggle it on.
Step 4 When you see your headset in the list, tap it and tap Connect.
Unpair a Bluetooth headset
You can disconnect a Bluetooth headset from your phone. The phone automatically saves your headset pairing
for later use.
Procedure
Step 1 Press .
Step 2 Scroll down to the Audio section and tap Bluetooth.
Step 3 Under the device you wish to disconnect, tap Unpair.
Set phone ringtone and volume
You can specify different ringtones to the lines so that you know which line an incoming call is on, simply
by the ringtone.
There are xxx preset ringtones on your phone. By default, sunrise is set as the ringtone for all lines.
Procedure
Step 1 Press .
Step 2 Scroll down to the Audio section and select Ringtone and volume.
Step 3 Drag the Volume slider left or right to adjust the volume.
Step 4 Select a ringtone for each of your configured line.
Cisco Video Phone 8875 Documentation
36
Settings
Unpair a Bluetooth headset
REVIEW DRAFT - CISCO CONFIDENTIAL