Cisco Aironet 1200 Series - Page 10

Contents
x
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Using Command-Line Diagnostics 9-19
Entering Diagnostic Commands 9-20
Diagnostic Command Results 9-20
:eap_diag1_on 9-21
:eap_diag2_on 9-21
:vxdiag_arpshow 9-22
:vxdiag_checkstack 9-24
:vxdiag_hostshow 9-25
:vxdiag_i 9-26
:vxdiag_ipstatshow 9-27
:vxdiag_memshow 9-28
:vxdiag_muxshow 9-29
:vxdiag_routeshow 9-30
:vxdiag_tcpstatshow 9-31
:vxdiag_udpstatshow 9-32
Tracing Packets 9-32
Reserving Access Point Memory for a Packet Trace Log File 9-32
Tracing Packets for Specific Devices 9-33
Tracing Packets for Ethernet and Radio Ports 9-34
Viewing Packet Trace Data 9-35
Packets Stored in a Log File 9-36
Packets Displayed on the CLI 9-37
Checking the Top Panel Indicators 9-37
Finding an Access Point by Blinking the Top Panel Indicators 9-40
Checking Basic Settings 9-40
SSID 9-40
WEP Keys 9-40
EAP Authentication Requires Matching 802.1x Protocol Drafts 9-41
Resetting to the Default Configuration 9-43