Cisco Aironet 1200 Series - Page 4

Contents
iv
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
CHAPTER 2 Using the Management Interfaces 2-1
Using the Web-Browser Interface 2-2
Using the Web-Browser Interface for the First Time 2-2
Using the Management Pages in the Web-Browser Interface 2-2
Navigating Using the Map Windows 2-4
Using the Command-Line Interface 2-5
Preparing to Use a Terminal Emulator 2-6
Connecting the Serial Cable 2-6
Setting Up the Terminal Emulator 2-7
Changing Settings with the CLI 2-7
Selecting Pages and Settings 2-9
Applying Changes to the Configuration 2-9
Using a Telnet Session 2-9
Using SNMP 2-10
Supported MIBs 2-10
CHAPTER 3 Configuration 3-1
Basic Settings 3-2
Entering Basic Settings 3-3
System Name 3-3
MAC Address 3-3
Serial Number 3-3
Configuration Server Protocol 3-4
Default IP Address 3-4
Default IP Subnet Mask 3-4
Default Gateway 3-4
Radio Service Set ID (SSID) 3-5
Role in Radio Network 3-5
Radio Network Optimization (Optimize Radio Network For) 3-7