Cisco ASR 1000 Series Configuration Guide

Table 4: Feature Information for WCCPv2 — IPv6 Support
Feature InformationReleasesFeature Name
This feature introduces support for
Web Cache Communication
Protocol version 2 (WCCPv2) in
an IPv6 environment.
WCCP is a Cisco-developed
content-routing technology that
intercepts IP packets and redirects
those packets to a destination other
than that specified in the IP packet.
Multiple routers can use WCCPv2
to service a content engine cluster.
In WCCPv1, only one router could
redirect content requests to a
cluster.
The following commands were
added: clear ipv6 wccp, clear
wccp, debug ipv6 wccp, debug
wccp, ipv6 wccp, ipv6 wccp
check acl outbound, ipv6 wccp
check services all, ipv6 wccp
group-listen, ipv6 wccp redirect,
ipv6 wccp redirect exclude in
ipv6 wccp source-interface, show
ipv6 wccp, show ipv6 wccp global
counters, show wccp, show wccp
global counters, show platform
software wccp service-number
ipv6 counters, show platform
software wccp rp active
service-number ipv6 , show
platform software wccp fp active
service-number ipv6 , show
platform hardware qfp active
feature wccp service id
service-number ipv6 .
15.2(3)T
15.1(1)SY1
Cisco IOS XE Release 3.10
WCCPv2—IPv6 Support
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company. (1005R)
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
117
WCCPv2—IPv6 Support
Feature Information for WCCPv2—IPv6 Support

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English