Cisco ASR 1000 Series

PurposeCommand or Action
(Optional) Excludes traffic on the specified interface from
redirection.
ip wccp redirect exclude in
Example:
Device(config-if)# ip wccp redirect exclude
in
Step 8
Configuring Closed Services
Perform this task to specify the number of service groups for WCCP, to configure a service group as a closed
or open service, and to optionally specify a check of all services.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
Enter one of the following commands:
•
ip wccp [vrf vrf-name] service-number [service-list service-access-list mode {open | closed}]
•
or
•
ip wccp [vrf vrf-name] web-cache mode {open | closed}
4.
ip wccp check services all
5.
ip wccp [vrf vrf-name ] {web-cache | service-number}
6.
exit
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Configures a dynamic WCCP service as closed or open.Enter one of the following commands:
Step 3
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
66
Configuring WCCP
Configuring Closed Services