Cisco ASR 1000 Series Configuration Guide

You can display information about the connected content engines and encapsulation, including software packet
counters, by entering the show adjacency [tunnel-interface] [encapsulation] [detail] [internal] command:
Device# show adjacency t0
Protocol Interface Address
IP Tunnel0 10.1.1.82(3)
Device# show adjacency t0 encapsulation
Protocol Interface Address
IP Tunnel0 10.1.1.82(3)
Encap length 28
4500000000000000FF2F7D2B1E010150
1E0101520000883E00000000
Provider: TUNNEL
Protocol header count in macstring: 3
HDR 0: ipv4
dst: static, 10.1.1.82
src: static, 10.1.1.80
prot: static, 47
ttl: static, 255
df: static, cleared
per packet fields: tos ident tl chksm
HDR 1: gre
prot: static, 0x883E
per packet fields: none
HDR 2: wccpv2
dyn: static, cleared
sgID: static, 0
per packet fields: alt altB priB
Device# show adjacency t0 detail
Protocol Interface Address
IP Tunnel0 10.1.1.82(3)
connectionid 1
0 packets, 0 bytes
epoch 0
sourced in sev-epoch 1
Encap length 28
4500000000000000FF2F7D2B1E010150
1E0101520000883E00000000
Tun endpt
Next chain element:
IP adj out of Ethernet0/0, addr 10.1.1.82
Device# show adjacency t0 internal
Protocol Interface Address
IP Tunnel0 10.1.1.82(3)
connectionid 1
0 packets, 0 bytes
epoch 0
sourced in sev-epoch 1
Encap length 28
4500000000000000FF2F7D2B1E010150
1E0101520000883E00000000
Tun endpt
Next chain element:
IP adj out of Ethernet0/0, addr 10.1.1.82
parent oce 0x4BC76A8
frame originated locally (Null0)
L3 mtu 17856
Flags (0x2808C4)
Fixup enabled (0x40000000)
GRE WCCP redirection
HWIDB/IDB pointers 0x55A13E0/0x35F5A80
IP redirect disabled
Switching vector: IPv4 midchain adj oce
IP Tunnel stack to 10.1.1.82 in Default (0x0)
nh tracking enabled: 10.1.1.82/32
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
60
Configuring WCCP
WCCP VRF Tunnel Interfaces

Cisco ASR 1000 Series Specifications

General

Brand	Cisco
Model	ASR 1000 Series
Category	Network Router
Language	English