Cisco ASR 1000 Series Configuration Guide

Document TitleRelated Topic
•
Cisco ACNS Software Caching Configuration
Guide, Release 4.2
•
Cisco ACNS Software listing page on
Cisco.com
Cisco ACNS software configuration information
Cisco IOS Security Command Reference
IP access list overview, configuration tasks, and
commands
•
Cisco IOS IP Addressing Services Configuration
Guide
•
Cisco IOS IP Addressing Services Command
Reference
IP addressing and services commands and
configuration tasks
Cisco IOS IP Application Services Command
Reference
WCCP commands: complete command syntax,
command mode, command history, defaults, usage
guidelines, and examples
Standards
TitleStandard
—
No new or modified standards are supported, and
support for existing standards has not been modified.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco software releases, and feature sets, use Cisco
MIB Locator found at the following URL:
http://www.cisco.com/go/mibs
No new or modified MIBs are supported, and support
for existing MIBs has not been modified.
RFCs
TitleRFC
—
No new or modified RFCs are supported, and support
for existing RFCs has not been modified.
IP Application Services Configuration Guide, Cisco IOS XE Release 3S (Cisco ASR 1000)
81
Configuring WCCP
Additional References

Cisco ASR 1000 Series Specifications

General

Series	ASR 1000
Category	Network Router
Operating System	Cisco IOS XE
Memory	Up to 64 GB
Interfaces	10 Gigabit Ethernet
Power Supply	AC or DC options
Dimensions	Varies by model
Encryption	IPsec, SSL
Storage	Varies by model
Operating Temperature	32°F to 104°F (0°C to 40°C)
Humidity	5% to 95% non-condensing
MTBF	Varies by model