Cisco ASR 1001-X Installation Guide

CHAPTER
2-1
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
2
Cisco ASR 1001-X Router Supported Hardware
Components
This chapter contains information about the supported hardware components on the Cisco ASR 1001-X
Router, and contains the following sections:
• Supported Hardware Components, page 2-1
• Supported Half-Height SPAs, page 2-2
• Supported Small Form-Factor Pluggable (SFP and SFP+) Transceivers, page 2-3
• Supported NIMs, page 2-4
• Cisco ASR 1001-X Router Power Supplies, page 2-5
Supported Hardware Components
Table 2-1 lists the hardware components supported on the Cisco ASR 1001-X Router.
Table 2-1 Supported Hardware Components
Component Description
Chassis 1 RU form factor
Ethernet Ports Six built-in Gigabit Ethernet and two built-in 10-Gigabit Ethernet ports
ESP A nonmodular, fixed ESP with a default throughput of 2.5 Gbps, which
is upgradable with a software-activated performance license of 5 Gbps,
10 Gbps, or 20 Gbps.
Route Processor Single integrated route processor
SIP Integrated SIP
SPA Slots 1 half-height (HH) SPA bay
NIM Slots 1
USB Slots 2

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g