EasyManuals Logo
Home>Cisco>Network Router>ASR 1001-X

Cisco ASR 1001-X Installation Guide

Cisco ASR 1001-X
142 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
6-9
Cisco ASR 1001-X Router Hardware Installation Guide
OL-32376-02
Chapter 6 Cisco ASR 1001-X Router License Verification
Per Port Counted License (10-GE Interfaces)
10-GE Interface Evaluation License Features
The following are the features of the 10-GE Interface Evaluation license:
There is only one 60-Day Evaluation Period countdown timer for both 10-GE ports. The timer is
initiated as soon as the first of the two ports is enabled.
A EULA will be presented, and must be accepted, the first time you enable either of the two ports
in order to utilize the requested port.
When the 60-Day Evaluation Period expires, the license automatically changes to an RTU license.
As with all other RTU licenses, there is no functionality disruption or accessibility concerns
following this transition. See Table 6-4.
There can be only one active interface_10g license. Either the Permanent License or the EvalRTU
License can be Active, but not both.
As with past license implementations, the Permanent license is of higher precedence than the
built-in EvalRTU license. However, when the Permanent license does not have enough port-count
(that is, when the user requests both built-in 10GE ports but the Permanent License only allows for
one port), the license priority changes between the Permanent and Evaluation licenses. In this case,
the Evaluation License becomes Active since it can accommodate both ports. The Permanent
License will automatically become Active if and when its port-count meets the user’s desired
configuration.

Table of Contents

Other manuals for Cisco ASR 1001-X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco ASR 1001-X and is the answer not in the manual?

Cisco ASR 1001-X Specifications

General IconGeneral
Product colorGray
Rack capacity1U
Rack mountingYes
Networking standards-
Ethernet LAN (RJ-45) ports6
Installed SFP modules quantity2
Flash memory1024 MB
Internal memory8192 MB
Processor cores4
AC input voltage85 - 264 V
Power source typeAC
Power consumption (typical)250 W
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 50 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 90 %
Security algorithmsAES
Weight and Dimensions IconWeight and Dimensions
Depth461.5 mm
Width439.42 mm
Height43.43 mm
Weight10590 g

Related product manuals